Ajax to Oakville · Toronto to Newmarket Mon–Sat · 8am – 7pm 416-881-2264
Home About Service Areas FAQ Blog Get a free quote 416-881-2264
Handyman · Richmond Hill, York Region

Handyman Services in Richmond Hill

Builder-trained handyman services across Richmond Hill — flat-rate quotes, same-week booking, and one accountable project manager on every job.

Get a free quote 416-881-2264
Handyman services in Richmond Hill — the short answer

FixitPlus provides handyman services across Richmond Hill, covering Mill Pond, Bayview Hill, Jefferson, Oak Ridges, Devonsleigh, Observatory and the Yonge Street condo corridor. We handle TV mounting, drywall and plaster repair, painting, light and plumbing fixtures, doors and carpentry, tile and grout, caulking, blinds and full to-do lists — quoted flat-rate, usually booked within the same week.

At a glance

Handyman in Richmond Hill — key facts

Area coveredMill Pond, Bayview Hill, Jefferson, Oak Ridges, Devonsleigh, Observatory, Rouge Woods, Crosby and the rest of Richmond Hill
Most-requested hereDrywall & Wall Repair, TV & Wall Mounting, Doors & Carpentry, Caulking & Sealing
All services12 handyman services, plus renovations from the same company
QuotesFree, no-obligation and flat-rate — agreed in writing before work starts
BookingMost handyman jobs booked within the same week · Mon–Sat · 8am – 7pm
Licensed workElectrical work by a licensed electrical contractor (ESA); plumbing that needs a permit by a licensed plumber; gas by a TSSA-registered gas technician
CoverFixitPlus Inc. — licensed, insured, WSIB covered, workmanship guarantee
Who you deal withAlan, Project Manager — one point of contact from quote to walkthrough
Get a quote416-881-2264 · info@fixitplus.ca · request a free Richmond Hill quote online
Local overview

Richmond Hill is one of the cities we know best. We completed a full project on a stone home here — interiors through to the exterior, pool surround and cabana — and the gallery from that job is on the site. Working on a house end to end teaches you a city’s housing stock in a way that driving between service calls never does, and Richmond Hill has an unusually wide spread of it.

Along Yonge Street and around the Mill Pond, you are into genuinely older Richmond Hill — post-war bungalows, side-splits and heritage-adjacent homes with plaster walls, original trim, settled floors and door openings that have not been square in decades. Repairs here are restoration-minded work. Plaster wants patching as plaster. Original baseboard and casing profiles usually have to be matched or carefully reproduced rather than replaced with modern stock. A door that drags needs the hinges, the jamb and the opening looked at together, not just a plane taken to the edge.

Head east into Bayview Hill or north into Jefferson and Devonsleigh and the picture changes to large 1990s and 2000s two-storey homes: high ceilings, formal staircases, tall foyer walls that homeowners want lighting or art on, and the double-height family-room wall that eventually gets a television. Oak Ridges adds newer construction again, which brings the familiar young-house list — settlement cracks at door corners, builder doors gone out of adjustment, shrinking caulk lines, and basements roughed in but never finished.

The Yonge corridor condos are a third kind of job: metal-stud partitions, concrete structure, building rules about anchoring and drilling hours, and elevator and loading-dock bookings that decide when the work can actually happen. We do a lot of TV mounts, blind installs, shelving and fixture swaps in these buildings, and we will ask about the building’s rules when we quote so the install is not derailed on the day.

What ties all three together is that Richmond Hill homeowners tend to have lists rather than single jobs — a mounted TV, two doors adjusted, a wall patched where furniture was moved out, the ensuite re-caulked, blinds up in the spare room. Booking a separate trade for each of those is expensive and slow. Handing the whole list to one insured, builder-trained crew and getting one flat-rate quote for the visit is the reason most of our Richmond Hill work happens.

Neighbourhoods

Where we work in Richmond Hill

Mill Pond Bayview Hill Jefferson Oak Ridges Devonsleigh Observatory Rouge Woods Crosby Harding North Richvale South Richvale Elgin Mills / Richmond Green

Not on the list? We cover the whole Greater Toronto Area — call and we will tell you straight away.

Most-requested

What Richmond Hill homeowners call us for

Plaster and heritage-trim repair near Mill Pond

Older homes around the Mill Pond and the Yonge corridor have plaster walls and original trim profiles. We repair plaster as plaster and match or reproduce trim, so the work reads as part of the house rather than a patch.

Tall foyer and great-room installs

Two-storey foyers in Bayview Hill and Jefferson mean art, lighting and TVs at height. We bring the right access equipment and anchor into structure — not into drywall and hope.

Door and hardware adjustment

Doors that drag, latches that miss the strike, deadbolts that need a shoulder. In older homes it is usually the opening; in newer ones it is usually the hinges. We diagnose before we adjust.

Yonge-corridor condo work

Metal-stud and concrete walls, anchoring rules, drilling-hour restrictions and elevator bookings. We confirm your building’s rules while quoting so the job completes in one visit.

Bathroom re-caulk and grout refresh

Grey, shrinking caulk and failing grout make a good bathroom look tired and let water where it should not go. We cut it out properly, re-seal with mould-resistant caulk, and leave dead-straight lines.

Post-move-in and pre-listing punch lists

The wall scuffs, nail holes, loose handles and touch-ups that come with moving in or getting a home ready to sell — handled in one organized visit instead of six.

Services

Handyman services in Richmond Hill

Ready to book? Request a free Richmond Hill quote or call 416-881-2264 — send the whole list and we quote it as one visit.

Proof of work

Work you can actually look at

Our Richmond Hill project — a stone home taken through interiors, exterior, pool surround and cabana — is documented in full on the site. Same company, same crew, same standards as a handyman visit.

Before we arrive

Planning a Multi-Job Handyman Visit in Richmond Hill

Most Richmond Hill calls are lists rather than single jobs, and whether a list gets finished in one visit or spills into a second trip is usually decided before we arrive. A few minutes of preparation lets us quote tightly, load the van with the right parts, and plan the order of work around your house — whether that is a side-split near the Mill Pond, a two-storey in Bayview Hill or a suite on the Yonge corridor.

None of this is required to get a quote. It simply turns an estimate into a firm, flat-rate price faster, and makes the day itself run smoother. Here is what helps most when you put your Richmond Hill list together.

One close-up and one step back

Send a close-up photo of each item and a wider shot showing the wall, the ceiling height and what surrounds it. For a TV, include the wall and the nearest outlet; for a sticking door, include the whole frame, not just the latch.

Measurements and model numbers

Window widths for blinds, the screen size and model of the TV, the faucet or light fixture you have already bought. It tells us which mount, anchors and fittings to bring, so nothing on the list waits on a store run.

Decide who supplies materials

If you have bought your own fixtures, paint or blinds, have them on site and checked for missing parts. If you would rather we supply them, tell us the finish or brand you like and we will include it in the quote.

Rank the list

Put the must-do items at the top. Older Richmond Hill houses can turn up surprises — plaster that crumbles once it is opened, a frame that is badly out of square — and we would rather spend that extra time on your priorities than on the bottom of the list.

Access, parking and building rules

Tell us where to park and whether pets will be home. For a condo, confirm the elevator booking and drilling hours, and check whether management needs a certificate of insurance from us before the visit.

FAQ

Handyman in Richmond Hill — common questions

Yes. Homes around the Mill Pond and the older Yonge Street blocks typically have plaster walls, original trim and openings that are no longer square. We repair plaster as plaster rather than skimming drywall compound over it, and we match or reproduce trim profiles instead of swapping in modern stock.

Richmond Hill is close to home for us and most jobs book within the same week. We give you a real arrival window when we confirm, and we prioritise anything urgent — a leaking fixture, a door that will not lock, a safety hazard.

Yes. Condo work here means metal-stud or concrete walls, building rules about anchoring and drilling hours, and booked elevator or loading-dock time. Tell us the building when you enquire and we will plan the visit around its rules so the job finishes on the first trip.

Both. FixitPlus came out of custom-home building, so the same company that mounts your TV also does kitchens, bathrooms, basements and additions. If a handyman list turns out to really be a small renovation, we will tell you and scope it honestly.

We quote flat-rate per visit, so a single small job is priced as its own visit. In practice most clients find it better value to gather a few items together — the cost per job drops considerably when several are handled in one trip.

In Richmond Hill, as anywhere in Ontario, a handyman should not take on work that legally belongs to a licensed trade. Electrical work done for pay must be carried out by a Licensed Electrical Contractor; moving or adding supply and drain lines goes to a licensed plumber; gas lines go to a licensed gas technician; structural changes need an engineer and a permit. We coordinate or refer those parts, then handle the patching, trim and painting around them.

If the wall is load-bearing, yes — in Richmond Hill, removing or altering a load-bearing wall needs a building permit from the City of Richmond Hill, and usually an engineer’s design, because a new beam has to carry the load the wall did. Even a non-structural wall can hide plumbing, ductwork or wiring. Check with the City’s building department before anything is opened; we can look at the wall first and tell you what it is likely doing.

In older Richmond Hill homes, most drafts come from worn weatherstripping, failed exterior caulk and doors that no longer close tight against their stops — all fixable without new windows. We replace weatherstripping and door sweeps, re-caulk where trim meets brick or siding, adjust sticking sashes and strikes, and seal the attic hatch. If a window’s sealed glass has fogged or the frame has rotted, we will tell you it is due for replacement instead.

Alan, Project Manager, FixitPlus Inc.
Reviewed by

Alan

Project Manager, FixitPlus Inc.

Scope and technical detail on this page is set by Alan, FixitPlus project manager, drawing on 20+ years of custom-home building in the GTA. Where a job legally requires a licensed trade or a permit, we say so on the page rather than in the small print.

  • 20+ years of custom-home building across the GTA
  • Project manager on new builds, additions and whole-home renovations
  • Single point of contact on every FixitPlus job

Last reviewed

Free estimates

Need a handyman in Richmond Hill?

Send the whole list and get one flat-rate quote — usually back within a business day.

Get a free quote 416-881-2264
Last updated ·Reviewed by Alan, Project Manager·FixitPlus Inc. — licensed, insured & WSIB covered